LAPP Olflex Classic 110 2×0.5 Sqmm Oil resistant PVC control Cable for wide range of application

LAPP Olflex Classic 110 2×0.5 Sqmm Oil resistant PVC control Cable for wide range of application

SKU: 1119752 Category:

OLFLEX CLASSIC 110 2×0.5 Low Voltage (LV) Power and control cable for General Applications, Fixed and Occasional Flexing Installation, Indoor use. Flame Retardant to, IEC 60332-1-2 Feature to U0/U : 300/500 V, 2 Cores, 0.5mm2, Number coded, unscreened, Polyvinyl chloride (PVC) outer sheath Colour, Grey, 18.8mm OD. Confirmed to CE, Approval -Fire protection, VDE Approve, ECO Lab 1119624

Compare

Description

ÖLFLEX CLASSIC 110 4G16

  • VDE-registered oil-resistant PVC control cable for a wide range of applications
  • CPR: Article number choice under www.lappkabel.com/cpr
  • VDE certificate of conformity with factory surveillance

PRODUCT DETAILS

Benefits

  • Wide choice of standardized lengths and individual cuts
  • Very broad range, items with up to 100 conductors

Application range

  • For fixed installation as well as occasional flexing at free, non-continuously recurring movement without tensile load
  • Dry or damp rooms that are subject to medium mechanical loads
  • Suitable for torsional applications which are typical for the loop in wind turbine generators (WTG)
  • In power chains for a travelling distance up to 5 m and 0,2 … 1 million bending cycles, for following dimensions: 0,5 to 2.5mm² and 2 to 7 conductors

Product features

  • Flame-retardant according IEC 60332-1-2
  • Good chemical resistance, see catalogue appendix T1
  • Oil-resistant according to DIN EN 50290-2-22 (TM54)

Norm References / Approvals

  • VDE reg. no. 7030 for the following sizes:up to 2.5 mm²: 2 – 65 coresfrom 4 mm²: 2 – 7 coresfrom 25 mm²: 2 – 5 cores

Product Make-up

  • Fine-wire strand made of bare copper wires
  • PVC insulation LAPP P8/1
  • Cores twisted in layers
  • PVC outer sheath, grey (similar RAL 7001)

TECHNICAL DATA

  • Download DATASHEET (PDF)
  • Minimum Bending RadiusMinimum Bending Radius
    • Occasional flexing: 10 x outer diameterIn power chains: 15 x outer diameter
    • Fixed installation: 4 x outer diameter
  • Temperature RangeTemperature Range
    • Occasional flexing: -15°C to +70°C In power chains: -5°C to +70°C
    • Fixed installation: -40°C to +80°C
  • Core Identification CodeCore Identification Code
    • Black with white numbers acc. to VDE 0293-1
  • Protective ConductorProtective Conductor
    • G = with GN-YE protective conductor
    • X = without protective conductor
  • Nominal VoltageNominal Voltage
    • U0/U: 300/500 V
  • Test VoltageTest Voltage
    • 4000 V
  • Conductor StrandingConductor Stranding
    • Fine wire according to DIN EN 60228 (VDE 0295), class 5 / IEC 60228 class 5
  • Classification ETIM 5Classification ETIM 5
    • ETIM 5.0 Class-ID: EC000104
    • ETIM 5.0 Class-Description: Control cable
  • Torsion movement in WTGTorsion movement in WTG
    • TW-0 & TW-1, refer to Appendix T0

Reviews

There are no reviews yet.

Be the first to review “LAPP Olflex Classic 110 2×0.5 Sqmm Oil resistant PVC control Cable for wide range of application”

Your email address will not be published. Required fields are marked *